I.Brief Introduction
The end suction centrifugal pump is a single-stage and single-suction type pump. It mainly consists of a casing, pump cover, impeller, shaft, shaft sleeve, and suspended frame, etc. The extending end of the shaft is supported by two rolling bearings, the bearing lubricant is mechanical oil or grease. The seal is gland packing or mechanical seal. The pump is driven directly by a motor through flexible coupling or it can be driven by a diesel engine.
II.Use Range
The end suction centrifugal pump is used in transporting clean water or liquids whose physical and chemical characteristics are similar to water. It is applicable in factories, mines, city water supplies, drainage, air-conditioning, fire-fighting, and agricultural irrigation.
III.Parameters
- Capacity: 3~3000m³/h with 2950RPM,1450RPM,980RPM
- Max head: 150M
- Temperature: -20℃~80℃
- Wetted material: Cast iron-HT200,HT250;SS304,SS316,SS306L,Duplex SS,Bronze
- Motor: 380V,415V,440V
A wide range of centrifugal pumps is supplied. Please feel free to contact us for any inquiry.
