I.Brief Introduction
2BE type water ring vacuum pump is a high-efficiency and energy-saving product for pumping gas that is without solid particles, insoluble in water, and non-corrosive, so as to form a vacuum and pressure in a closed container. By changing the structure material, it can also be used to pump corrosive gas or use the corrosive liquid as a working fluid.
2BE water ring vacuum pump adopts a single-stage single-acting structure and it has the advantages of simple structure, convenient maintenance, reliable operation, high efficiency, and energy saving. We have optimized the design of the key parts of the 2BE water ring vacuum pump, such as the distribution plate, impeller, and pump shaft, to simplify the structure, improve performance, and realize energy savings.
It can adapt to harsh working conditions such as large water displacement and load shock fluctuations. The blades of the impeller are stamped and formed at one time, and after processing, the dynamic balance is achieved. After the impeller is welded and finished heat treatment, the impeller has better toughness, and the impact resistance and bending resistance of the blades is guaranteed.
2BE water ring vacuum pump is easy to install, use, and maintenance. There are a gas-water separator and exhaust ports with the pump. The pump cover is equipped with an exhaust valve inspection window. The gap between the impeller and the distribution plate can be adjusted by the glands at the end of the positioning shaft.
2BE water ring vacuum pumps are widely used in papermaking, chemical, petrochemical, light industry, pharmaceutical, food, metallurgy, building materials, stoneware, coal washing, mineral processing, fertilizer, and other industries.
II. Use Range
1. The 2BE water ring vacuum pump can work continuously for a long time in the ambient temperature range of 5-40℃ and the inlet pressure is less than 1330Pa.
2. The 2BE type water ring vacuum pump is not suitable for pumping gas with high oxygen content, toxic, explosive, corrosive to metals, chemical reaction to the pump oil, and gas containing particulate dust. It is also not for transporting gas from one container to another.
3. The continuous working time of the 2BE water ring vacuum pump under the inlet pressure from atmospheric pressure to 6000Pa should not exceed 3 minutes to avoid damage to the pump caused by oil injection or poor lubrication.
III.Parameters
Please feel free to send us an inquiry for the water ring vacuum pump.
