Directly-coupled Magnetic Drive Pump
I.Brief Introduction The magnetic drive pump is a new product that applies the working principle of permanent magnet coupling to a centrifugal pump. It has the characteristics of reasonable design,…
Marine Bronze Flanged Stop Valve
The marine bronze flanged stop valve is GB/T587-2008 standard. Nominal diameter: DN15~150 Nominal working pressure: PN6~25(0.6~2.5MPa) Liquid water, seawater, lubricating oil, fuel and steam(Temperature≤250℃). Material table of main parts: Part NameMaterialValve…
Marine Cast Steel Flanged Stop Valve
The marine cast steel flanged stop valve is GB/T584-2008 standard. Nominal diameter: DN20~300 Nominal working pressure: PN10~64(1.0~6.4MPa) Liquid water, lubricating oil, fuel and steam(PN1.0~1.6 MPa Temperature≤300℃; PN2.5~6.4 MPa Temperature≤400℃). Material table…
Marine Bronze Flanged Gate Valve
The marine bronze flanged gate valve is CB/T467-1995 standard. Nominal diameter: DN40~400 Nominal working pressure: PN2.5~6(0.25~0.6MPa) Liquid water, seawater, lubricating oil and fuel. Material table of main parts: Part NameMaterialValve…
Marine Cast Steel Flanged Gate Valve
The marine cast steel flanged gate valve is CB/T466-1995 standard. Nominal diameter: DN50~500 Nominal working pressure: PN2.5~10(0.25~1.0MPa) Liquid water, lubricating oil and fuel. Material table of main parts: Part NameMaterialValve…
Horizontal Marine Centrifugal Pump
I.Brief Introduction The horizontal marine centrifugal pump is designed according to CB/T3721-1995. It has a compact structure, small volume, and reliable performance. II.Use Range The horizontal marine pump is applicable…
Vertical Marine Centrifugal Pump
I.Brief Introduction The vertical marine centrifugal pump is designed according to CB/T3523-2011. There are directly coupled and non-directly coupled structures to be selected for convenient installation. II.Use Range The vertical…
End Suction Centrifugal Pump
I.Brief Introduction The end suction centrifugal pump is a single-stage and single-suction type pump. It mainly consists of a casing, pump cover, impeller, shaft, shaft sleeve, and suspended frame, etc.…
Split Casing Centrifugal Pump
I.Brief Introduction The single-stage double suction split casing centrifugal pump is the third generation of products to replace S, SH, SA, and SAP. The casing is axially split, which permits…
Heavy Duty Multistage Split Casing Centrifugal Pump
I.Brief Introduction The heavy-duty multistage split casing centrifugal pump features large flow, and high head characteristics. The product also meets API 610 standards and can be used for crude oil…
