During the operation of the centrifugal pump, various failures will inevitably occur. Below we will explain the 6 major centrifugal pump problems and solutions. 1. Bearing heat >>>Reason (1) Poor lubrication, excessive or insufficient amount of oil, and poor oil quality (2) The pump shaft and the motor shaft are
Cavitation begins as the formation of vapor bubbles at the impeller eye due to low pressure. The bubbles form at the position of lowest pressure at the pump inlet (see Figure 1) which is just prior to the fluid being acted upon by the impeller vanes, they are then rapidly
This is a list of centrifugal pump system tips or DOS AND DON’TS for pump systems. You may not of thought of some of these and they will help you design and trouble-shoot pump systems and select the proper pump. Also there is information here that is hard to find elsewhere.
Copyright © 2024 Shanghai Adefo Solutions Co., Ltd. All rights reserved.
