D Series Horizontal Multistage Centrifugal Pump
I.Brief Introduction
D type centrifugal pump is a single-suction, multi-stage, centrifugal water pump, suitable for mine, factory, and urban water supply and drainage.
II. Use Range
It is used for transferring clean water without solid particles or physical, or chemical properties similar to clear water liquids. The temperature of the conveying medium is between 0 and 80℃.
III. Parameters
- The inlet allowable pressure is 0.6MPa.
- Parameter range: Flow Q: 10 ~ 500m3/h
- Head H: 33 ~ 850m
DG Series Horizontal Multistage Centrifugal Pump
I.Brief Introduction
DG type centrifugal pump is a single-suction, multi-stage, centrifugal water pump, suitable for medium and low-pressure boiler feed water, factory, and urban high-head water conveyance.
II. Use Range
It is used for transferring water or physical and chemical properties similar to clear water. Transport medium temperature: – 20 ~ 105℃.
III. Parameters
- Pump inlet pressure should not exceed 0.59 MPa (6 kg / cm 2).
- Parameter range: Flow Q: 6 ~ 346m3/h
- Head H: 102~1056m
A wide range of centrifugal pumps is supplied. Please feel free to contact us for any inquiry.
