I.Brief Introduction
The single-stage double suction split casing centrifugal pump is the third generation of products to replace S, SH, SA, and SAP. The casing is axially split, which permits the removal of the complete rotor without moving either the piping or the motor. Pumps generating high heads have double volutes to reduce radial forces. A replaceable wear ring protects the casing at the impeller running clearances. Flange drilled to ISO, DIN, BS or ANSI.
The closed double suction impeller gives practically zero axial forces. Each impeller is statically and dynamically balanced according to ISO1940.
Vertical or horizontal, soft packing or mechanical seal, grease, or oil lubrication bearing on request.
II.Use Range
The single-stage double suction split casing centrifugal pump is widely used for cooling water, water supply, and distribution, fire protection, metal manufacturing, irrigation, seawater, etc.
III.Parametres
- Capacity: Q up to 20000m3/h
- Head: H up to 200m
- Temperature: Up to 105 ℃
- Speed: 2900/1450/980/740/580rpm;3500/1750/1180/890/710rpm
- Standard material:
-Casing: Cast iron, ductile cast iron, cast steel; stainless steel;
-Impeller: Cast iron, bronze, brass, stainless steel;
-Shaft: C-steel, Cr-steel;
-Wear ring: Cast iron, brass
IV.Advantages
CFD fluid calculation technology used to design impeller and pump cover flow channel, pump efficiency is particularly high; Unique wear-resistant design, pump wear resistance is good, long service life; Machining center processing metal mold casting, beautiful appearance, smooth flow channel; Can be installed vertically or horizontally.
A wide range of centrifugal pumps is supplied. Please feel free to contact us for any inquiry.
